Abbildungen der Seite
PDF
EPUB
[blocks in formation]

328 Tubes, pipes, flues, and stays, iron

or steel, lap-welded, butt-wel-
ded, seamed, or jointed, not

thinner than 65/1000 inch:
Not less than 38 inch in diameter 34 cent per lb. 34 cent per lb. 20 per cent.19
Less than 38 and not less than 114 cents per lb... 114 cents per lb... 20 per cent.19

14 inch in diameter.
Less than 44 inch in diameter...-. 134 cents per lb... 134 cents per lb. 20 per cent.19
Made of charcoal iron..

144 cent per lb. 144 cents per lb. 20 per cent.19
minimum.

minimum.
Tubing or hose, flexible metal, 30 per cent.

30 per cent.

20 per cent.
whether covered with wire or
other material, including any ap-
pliances or attachments affixed

thereto, n. s. p. f.
329 Anchor or stud link chain:

2 inches or more in diameter. 142 cents per lb... 142 cents per lb... 20 per cent.20

Less than 2 inches in diameter 2 cents per lb.---- 2 cents per lb. 20 per cent.20
Chain 21 and chains of all kinds,

made of iron or steel:
Not less than 34 inch in diameter-| 76 cents per lb... 78 cents per lb. 20 per cent.20
Less than 34 and not less than 38 | 148 cents per lb.--. 116 cents per lb.- 20 per cent.20

inch in diameter.
Less than 38 and not less than 516 | 278 cents per lb.--. 246 cents per lb.. 20 per cent.20

inch in diameter.
Less than 56 inch in diameter... 4 cents per lb.----- 4 cents per lb.. 20 per cent.20
Chains of iron or steel, used for the

transmission of power:
Ofnot more than 2-inch pitch and 40 per cent

35 per cent 22 25 per cent.23
containing more than 3 parts
per pitch, and parts thereof,

finished or unfinished.
All other chains used for the trans- 35 per cent.

35 per cent 22 25 per cent.23
mission of power, and parts

thereof. 330 Bolts, with or without threads or 1 cent per lb. 1 cent per lb. 10 per cent.

nuts, and bolt blanks, of iron or

steel.
Nuts, nut blanks, and washers, of $ío cent per

510 cent per lb.

5 per cent.24
wrought iron or steel.
Spiral nut locks, and lock washers, 35 per cent. 35 per cent.

30 per cent.
of iron or steel.
331 Cut nails and cut spikes, of iron or 410 cent per lb. 410 cent per lb.

Free.
steel, exceeding 2 inches in length.25
Cut nails, of iron or steel, not ex- 15 per cent

15 per cent.

Free.
ceeding 2 inches in length.26
Cut tacks and brads, of iron or 15 per cent.

15 per cent..

Free.
steel, not exceeding 2 inches in
length.26
Hobnails, of iron and steel, not ex- 15 per cent.

15 per cent

Free.
ceeding 2 inches in length.26
Horseshoe nails, and other iron or 142 cents per lb... 112 cents per lb..... Free.

steel nails, n. s. p. f.
Nails, spikes, tacks, brads, and sta-

ples, made of iron or steel wire:
Not less than 1 inch in length nor lo cent per lb.

Free.27
smaller than 65/1000 inch in di-

Kio cent per lb.

115 per cent. 28 ameter. Less than 1 inch in length and smaller than 651000 inch in di. 34 cent per lb.

Free.27 34 cent per lb.

15 per cent.28 ameter.

610 cent per lb.--

(Free.20

120 per cent.30 19 Lap-welded, butt-welded, seamed, or jointed iron or steel tubes, pipes, flues, or stays. 20 Chain or chains of all kinds, made of iron or steel, n. s. p. f.

21 Provided, That all articles manufactured wholly or in chief value of chain shall not be subject to a lower rate of duty than that imposed upon the chain of which it is made, or of which chain is the component material of chief value. (Acts of 1922 and 1930.)

23 Sprocket and machine chains of iron and steel, and parts thereof. (Act of 1922.)
23 Sprocket and machine chains. (Act of 1913.)
24 “Of wrought iron or steel” not in act of 1913.
25 “Exceeding 2 inches in length" added in acts of 1922 and 1930.
36 “Not exceeding 2 inches in length” added in acts of 1922 and 1930.
27 Wire nails and staples.
28 Tacks and brads of iron or steel wire dutiable as manufactures of wire.
29 Spikes of iron and steel only.
-30 Iron and steel nails.

lb.

Spikes, tacks, brads, and staples, }910 cent per lb.

[blocks in formation]

331

Upholsterers' nails, chair glides,
and thumb tacks, of two or more

cents per 15:30

3 cents per lb... pieces of iron or steel, finished or

or Koc. per lb.31

20 per cent.32 unfinished.

|(40 per cent. 32
Staples in strip form, for use in pa.

Free.34
2 cents per lb...
per fasteners or stapling machines.

34 cent per lb.33.

120 per cent.31 332 Rivets, studs, and steel points, | 30 per cent.. 30 per cent.

20 per cent.
lathed, machined, or brightened,
and rivets or studs for nonskid.

ding automobile tires.

Rivets of iron or steel, n. s. p. I..... 1 cent per lb.---. 1 cent per lb.. 20 per cent. 333 Horse, mule, or ox shoes, of wrought

iron or steel: Common...

4 cent per lb... y cent per lb Free. Punched, drilled, or tapped, for 1 cent per lb. 1 cent per lb. Free.

use with adjustable wrought

iron or steel skid calks.
Solid drop-forged calked shoes. 1 cent per lb. 1 cent per lb.

Free. 334 Steel shavings..

5 cents per lb. and 5 cents per lb. and 20 per cent.

30 per cent. 30 per cent. Steel wool...

10 cents per lb. 10 cents per lb. 20 per cent.

and 30 per cent. and 30 per cent. 335 Grit, shot, and sand of iron or steel, 34 cent per lb. 34 cent per lb. 30 per cent.36

in any form. 336 Corset clasps, corset steels, and 35 per cent.

35 per cent.

15 per cent.
dress steels, whether plain or
covered with cotton, silk, or other

material.36
337 Card clothing not actually and per-

manently fitted to and attached
to carding machines or to parts
thereof at the time of importa-

tion, manufactured with:
Round iron or untempered round 20 per cent.. 20 per cent.

10 per cent.
steel wire.
Plated wire, or other than round

45 per cent.
45 per cent.

35 per cent.
iron or steel wire, or with felt
face, wool face, or rubber-face

cloth containing wool.
Tempered round steel wire. 45 per cent.

45 per cent.. 35 per cent. 338 Screws, commonly called wood 25 per cent.

25 per cent.

25 per cent. screws, of iron or steel. 339 Table, household, kitchen, and

hospital utensils, and hollow or

flat ware,37 n. S. p. f:
Composed of iron or steel and 5 cents per lb. and 5 cents per lb. and 25 per cent.
enameled or glazed with vitre- 30 per cent.

30 per cent.
ous glasses.
Composed wholly or in chief | 842 cents per lb. 11 cents per lb. and 25 per cent.
value of aluminum.

and 40 per cent. 55

per cent.
Composed wholly or in chief 40 per cent.. 40 per cent.

20 per cent. 38
value of copper, brass, steel, or
other tase metal, not plated
with platinum, gold, or silver,

and n. s. p. f.
Plated with platinum.

65 per cent.
40 per cent.

50 per cent.39
Plated with gold..

65 per cent.
40 per cent.

50 per cent.39
Plated with silver.

50 per cent.
40 per cent.

50 per cent.89
Any of the foregoing containing

10 per cent addielectrical heating elements as

tional to rates
constituent parts thereof.40

provided on ta-
ble, household
and

kitchen
utensils, and
hollow

or flat

ware, n. s. p. f. 30 Iron and steel nails. 31 Tacks, n. s. p. f. 82 Articles or wares n. s. p. f., if composed wholly or in chief value of metal. 33 Staples, made of iron or steel wire,

less than 1 inch in length and smaller than 654000 of 1 inch in diameter.

34 Wire staples. 35 That can be used as abrasives. (Act of 1913.) 38 “Whether plain or covered with cotton, silk, or other material" added in acts of 1922 and 1930. I

37 In acts of 1922 and 1930“ household utensils” and “flat ware" were added and words limiting the provision to "similar hollow ware" removed.

38 Articles or wares, n. S. p. f., of base metal, not plated with gold or silver.

39 Articles or wares, n. s. p. f., composed wholly or in part of platinum, gold or silver, and articles or wares plated with gold or silver.

40 The foregoing rates shall apply to the foregoing articles whether or not containing electrical heating elements as constituent parts thereof. (Act of 1930.)

[blocks in formation]

340

12 per cent.
12 per cent.
12 per cent.

12 per cent. 41
12 per cent.
12 per cent.
12 per cent.

341

25 per cent.

15 per cent.

15 per cent.

342

35 per cent.

Circular saws..

20 per cent.

20 per cent. Crosscut saws.

20 per cent.

20 per cent.
Hand, back, and all other saws, 20 per cent.

20 per cent.
n. s. p. f.
Jewelers' or piercing saws.

40 cents per gross..

40 cents per gross.. Mill saws.

20 per cent.

20 per cent. Pit and drag saws.

20 per cent.

20 per cent. Steel band saws, finished or further | 20 per cent. 20 per cent.

advanced than tempered and pol

ished.
Lithographic plates of stone or other 25 per cent.

25 per cent..
material engraved, drawn, or pre-

pared.
Plates of iron or steel engraved or 25 per cent.

25 per cent.
fashioned for use in the production
of designs, patterns, or impres-
sions on glass in the process of

manufacturing plate or other glass.
Steel plates, stereotype plates, elec- 25 per cent.. 25 per cent.

trotype plates, halftone plates,
photogravure plates, photo-en-
graved plates, and plates of other
materials, engraved or otherwise

prepared 13 for printing.
Umbrella and parasol ribs and 60 per cent... 50 per cent..

stretchers, composed wholly or in
chief value of iron, steel, or other
metal, in frames or otherwise, and
tubes for umbrellas, wholly or
partly finished.
Needlecases or needlebooks fur- | 45 per cent.. 45 per cent..

nished with assortments of nee-
dles or combinations of needles

and other articles.
Needles:
Crochet..

$1.15 per 1,000 and $1.15 per 1,000 and

40 per cent. 48 40 per cent.
For embroidery machines of every $1.15 per 1,000 and $1.15 per 1,000 and
description, n. S. p. f.

40 per cent.

40 per cent.
For knitting and sewing ma- $1.15 per 1,000 and $1.15 per 1,000 and
chines, n. s. p. f.

40 per cent.

40 per cent.
For shoe machines

$1.15 per 1,000 and $1.15 per 1,000 and
40 per cent.

40 per cent.
Latch.

$2 per 1,000 and 60 $2 per 1,000 and 50
per cent.

per cent.
Spring-beard..

$1.50 per 1,000 and $1.15 per 1,000 and
50 per cent.

40 per cent.
Tape, knitting, and all other, 45 per cent. 45 per cent.

n. s. p. f., and bodkins of metal.
Cylindrical steel rolls ground and 25 per cent.

25 per cent.
polished, valued at 25 cents per

pound or over.
Any of the foregoing containing 49 40 per cent.

25 per cent.
more than Yo per cent vanadium
or more than 310 per cent tung-
sten, molybdenum, or chro-
mium.

343

20 per cent.

20 per cent.44

20 per cent.44, 46

20 per cent.

Free.

20 per cent.

20 per cent.17

20 per cent.

344

20 per cent.48

20 per cent. 48

11 All other saws, n. S. p. f.

12 Steel engraved forms for bonds, debentures, stock certificates, negotiable receipts, notes and other securities; and engraved steel plates,

suitable for use in engraving or printing bonds, stock certificates or other securities, free.

43 " Or otherwise prepared” added in acts of 1922 and 1930.

44 No articles other than the needles which are specifically named in this section shall be dutiable as needles unless having an eye and fitted and used for carrying a thread. (Act of 1913.)

45 Or crochet "hooks," act of 1930. 46 All other needles, n. s. p. f. 47 Needles for knitting machines. 48 Articles or wares n. s. p. f., if composed wholly or in chief value of iron, stoel, lead, copper, brass, nickel,

wter, zinc, aluminum, or other metal, but not plated with gold or silver, and whether partly or wholly manufactured.

49 New classification made by act of 1930.

[blocks in formation]

per 100.53

per 100.53

345 Saddlery and harness hardware: 50

Articles of iron, steel, brass, com

position, or other metal, com-
monly or commercially
known as saddlery or riding

bridle hardware-
Not plated with gold or silver -50 per cent. 50 per cent

20 per cent. 48
Plated with gold or silver.. 60 per cent..

60 per cent.

50 per cent.51
Buckles, rings, snaps, bits, swiv-

els, and all other articles of
iron, steel, brass, composi-
tion, or other metal, com-
monly or commercially

known as harness hardware-
Not plated with gold or silver. 35 per cent.

35 per cent.

20 per cent. 48 Plated with gold or silver.. 60 per cent.

60 per cent.

50 per cent.81 346 Buckles and parts thereof, made

wholly or partly of iron, steel,

or other base metal: 52
Belt and parts thereof,
Valued at not more than 20 5 cents per 100 and 5 cents per 100 and 15 per cent.
cents per 100.

20 per cent.

20 per cent.
Valued at more than 20 and 10 cents per 100 and 10 cents per 100 15 per cent.
not more than 50 cents per 100. 20 per cent.

and 20 per cent.
Valued at more than 50 cents 15 cents per 100 15 cents per 100 15 per cent.

and not more than $1.6633 and 20 per cent. and 20 per cent.
Shoe or slipper and parts thereof-
Valued at not more than 20 5 cents per 100 and 5 cents per 100 and 20 per cent. 48
cents per 100.

20 per cent.

20 per cent.
Valued at more than 20 and not 10 cents per 100 10 cents per 100 20 per cent. 48

more than 50 cents per 100. and 20 per cent. and 20 per cent.
Valued at more than 50 cents 15 cents per 100 15 cents per 100 20 per cent.48

and not more than $1.6633 and 20 per cent. and 20 per cent.
Trouser and waistcoat and parts

thereof,
Valued at not more than 20 5 cents per 100 and 5 cents per 100 and 15 per cent.
cents per 100.

20 per cent.

20 per cent.
Valued at more than 20 and not 10 cents per 100 10 cents per 100 15 per cent.

more than 50 cents per 100. and 20 per cent. and 20 per cent.
Valued at more than 50 cents 15 cents per 100 .15 cents per 100 15 per cent.

and not more than $1.6633 and 20 per cent. and 20 per cent.

per 100.63
347 Hooks and eyes, wholly or in chief 442 cents per lb. | 412 cents per lb. 15 per cent.

value of metal, whether loose, and 25 per cent. and 25 per cent.
carded, or otherwise, including
weight of cards, cartons, and im-

mediate wrappings and labels.54 348 Snap fasteners and clasps, and parts

thereof, by whatever name
known, or of whatever material
composed, not plated with gold,
silver, or platinum; all the fore-
going valued at not more than

$1.6623 per hundred.55
Not mounted on tape.
55 per cent.. 55 per cent..

(15 per cent.58

120 per cent 57
Mounted on tape, including sew-
on fasteners.
360 per cent.

s15 per cent.58
60 per cent.

120 per cent.57 48 Articles or wares n.s. p. f., if composed wholly or in chief value of iron, steel, lead, copper, brass, nickel, pewter, zinc, aluminum, or other metal, but not plated with gold or silver, and whether partly or wholly manufactured.

10 This classification made in acts of 1922 and 1930. 81 Articles or wares n. s. p. f.,

plated with gold or silver. 62 “Or other base metal” added in acts of 1922 and 1930. 53 “And not more than $1.6633" added in act of 1930.

54"Whether loose, carded, or otherwise, including weight of cards, cartons, and immediate wrappings and label” not in act of 1913.

56 “All the foregoing valued at not more than $1.6633 per hundred” added in act of 1930.
56 Made wholly or in chief value of iron or steel.
87 Composed of metal other than iron or steel.

[blocks in formation]

349 Buttons: 58

Metal
Embossed with a design, de- 45 per cent... 45 per cent.

15 per cent.
vice, pattern, or lettering.
N. s. p. f.

34 cent per line per 34 cent per line per 15 per cent.

gross and 15 per gross and 15 per
cent.

cent.
Nickel bar.

112 cent per line 2 cent per line 15 per cent.
per gross and 15

per gross and 15
per cent.

per cent.
Trouser-
Metal (except steel) -

412 cent per line 112 cent per line 15 per cent.
per gross and 15

per gross and 15
per cent.

per cent.
Steel.

14 cent per line per 14 cent per line per 15 per cent.
gross and 15 per gross and 15 per
cent.

cent. 350 Pins, not plated with gold or silver,

and not commonly known as

jewelry:
Brass, copper, iron, steel, or other

35 per cent.... 35 per cent... 20 per cent.59 base metal, with heads of glass,

paste, or fusible enamel.
With solid heads, without orna- 35 per cent.

35 per cent.

20 per cent. mentation, including hair, safe

ty, hat, bonnet, and shawl pins. 351 Pers, n. s. p. f.: Of plain or carbon steel.

15 cents per gross..

12 cents per gross 60 Wholly or in part of other metal.. 18 cents per gross.. 12 cents per gross 60

8 cents per gross.60 With nib and barrel in one piece. 20 cents per gross.. 15 cents per gross.- 12 cents per gross. 352 Twist and other drills, reamers, 50 per cent.

40 per cent 61 20 per cent.61 milling cutters, taps, dies, die heads, and metal-cutting tools of all descriptions, and cutting edges or parts for use in such tools, composed of steel, or substitutes for steel, suitable for use in cutting metal, n. s. p. f.62 Cutting tools of any kind contain- 60 per cent.

60 per cent 63 20 per cent.61 ing more than Kio per cent of vanadium, or more than 310 per cent of tungsten, molybdenum, or

chromium.62
353 All articles suitable for producing,

rectifying, modifying, control-
ling, or distributing electrical

energy:
Electrical telegraph (including 35 per cent 64 30 per cent 65 20 per cent.61

printing and typewriting), radio and ignition apparatus, X-ray machines, electric motors, fans, locomotives, portable tools, washing machines, and refrigerators. Telephone, wiring and therapeu- 35 per cent 64 40 per cent 612 20 per cent.61

tic apparatus, furnaces, ovens, heaters, ranges, and signs. Signaling and welding apparatus, 35 per cent 64 40 per cent 61 or 30 20 per cent.61 instruments (other than labora

per cent.66 tory), and other electrical de

vices and articles. 68 Line measure being 140 of 1 inch. 59 Pins made of wire dutiable at 15 per cent. 60 Pens, metallic, n. s. p. f. 61 Articles or wares n. s. p. f., composed wholly or in chief value of iron, steel, or other metal.

62 New classification made by act of 1930, which provides also that “The foregoing rates shall apply whether or not the articles are imported separately or as parts of or attached to machines, but shall not apply to holding or operating devices.” 63 Containing more than 50 per cent tungsten or molybdenum.

04 All the foregoing, and parts thereof, finished or unfinished, wholly or in chief value of metal, and n. S. p. f.

65 Machines or parts, n. s. p..

« ZurückWeiter »