It was requisite for a specific purpose to reduce the internal diameter to 34 inches, and this was effected by the insertion of a smaller cast-iron cylinder into the centre of the large one ; and to insure some initial strain, the large cylinder was expanded... Journal of the Franklin Institute - Seite 4021850Vollansicht - Über dieses Buch
| Edwin Clark - 1850 - 518 Seiten
...reduce the internal diameter to 3J inches, and this was effected by the insertion of a smaller cast-iron cylinder into the centre of the large one; and to...piston. The steel was "upset" by the pressure, and the internal diameter of the small cylinder was increased by full T35ths of an inch! ie the diameter... | |
| 1850 - 554 Seiten
...and this was effected by the insertion of a smaller cast iron cylinder into the centre of the Urge one ; and to insure some initial strain, the large...inner cylinder was partly filled with pewter, and a iteel piston being fitted to the bore, a pressure of 972 tons waa pat on the steel piston. The steel... | |
| Perry Fairfax Nursey - 1850 - 548 Seiten
...internal cylinder being first turned too large, was thus powerfully compressed. The inner cylindei was partly filled with pewter, and a steel piston...piston. The steel was "upset" by the pressure, and the internal diameter of the small cylinder was increased by full three-sixteenths of an inch ; 1.... | |
| 1852 - 446 Seiten
...being first turned too large, was thus powerfully compressed. The inner cylinder was partly filled.with pewter, and, a steel piston being fitted to the bore,...972 tons was put on the steel piston. The steel was vpset by the pressure, and the internal diameter of the small cylinder was increased by full three... | |
| 1852 - 460 Seiten
...reduce the internal diameter to 34 inches, and this was effected by the insertion of a smaller cast-iron cylinder into the centre of the large one ; and to...steel piston. The steel was upset by the pressure, and the internal diameter of the small cylinder was increased by full three sixteenths of an inch ; that... | |
| Septimus Norris - 1852 - 356 Seiten
...internal diameter three and a half inches, this was effected by the insertion of a smaller cast-iron cylinder into the centre of the large one ; and to...piston- The steel was ' upset- by the pressure, and the internal diameter of the small cylinder was increased by full three-sixteenths of an inch ; i-... | |
| 1852 - 450 Seiten
...reduce the internal diameter to 3J inches, and this was effected by the insertion of a smaller cast-iron cylinder into the centre of the large one ; and to...steel piston. The steel was upset by the pressure, and the internal diameter of the small cylinder was increased by full three sixteenths of an inch ; that... | |
| Septimus Norris - 1854 - 336 Seiten
...internal diameter three and a half inches, this was effected by the insertion of a smaller cast-iron cylinder into the centre of the large one; and to...being fitted to the bore, a pressure of 972 tons was LOSS FROM RESISTANCES. 207 put on the steel piston. The steel was 'upset' by the pressure, and the... | |
| 1857 - 604 Seiten
...Eastou & Arnos. _, The subject of the experiment was a cast iron cylinder, log inches thick, and 14J inches high; the external diameter being 18 inches....piston. The steel was " upset " by the pressure, and the internal diameter of the small cylinder was increased by full three-sixteenths of an inch; that... | |
| |